DANTHERM COUNSELLING:
DISPLACEMENT FREE COOLING
IN EUROPEAN NETWORKS

The efficiency of any cooling solution depends on the conditions at your site. This is why Dantherm met with a large Telecom operator, who was convinced that Displacement Free Cooling was the best choice for rooms and containers in their entire network.

A hands-on meeting with Dantherm

How do you explain when and where to apply traditional Free Cooling, Displacement Free Cooling or Air Conditioning without getting lost in manuals? Well, it’s not easy. Therefore, Dantherm loaded a van with three products and a corresponding number of engineers, and took the trip to the Czech Republic for a hands-on meeting with a large Telecom operator. This opened the operator’s eyes to the technologies behind all three cooling solutions and why knowing your site conditions are critical to the cost-efficiency of your solution.

Displacement Free Cooling: ideal conditions

Displacement Free Cooling by Dantherm (DFC) is most efficient under the following conditions:

  • In rooms up to 12m2DFC installation sketch
  • When the internal air is stagnant

This is why: Cool outdoor air is supplied at the bottom of the room through a bag filter. A cushion of cool air builds up at the bottom of the room, forcing the warmer air to move up.Displacement Free Cooling DFC

Specific strengths of the DFC-solution

The Dantherm DFC-units are less cost-intensive and more silent than traditional Free Cooling solutions, because they operate with lower air flows and fan speed. Furthermore, the units are small in size, taking up a minimum of space inside the room.

Shared knowledge – different strategies

By sharing technical knowledge and strengths and weaknesses about different cooling methods available, the client was equipped to making decisions about differentiated cooling strategies, thus ensuring the highest possible savings across their network. Displacement Free Cooling turned out to be the ideal solution for the operator’s sites in the Czech Republic. For the remaining sites in Europe, the operator chose to approve two Dantherm solutions: The Combo Cooling, a unit operating with Free Cooling and Air Conditioning, and the Flexibox, a unit operating just with Free Cooling. At present moment, the DFC-solutions related to this specific case are in operation at test sites in the Czech Republic. Overall, Dantherm has 2000+ DFC units running in the field.

Want a visit?

Give us a call right now: +45 96 14 37 83

Product page

Capacities and technical data of the DFC solutions

We look forward
to answering
your questions!

Customer support
+45 96 14 37 83

Contact us online
Want a visit
from our engineers?

Find how how much more energy-efficient your site could be: schedule a non-binding meeting!

Contact us online