Global site
Denmark
Sweden
Norway
Germany
Switzerland - DE
France
Spain
Italy
United Kingdom
Россия
Poland- TO COOL
- Case studies - Free Cooling
- Case studies - DC Air Conditioning
- Case studies - Heat Exchange
- Case studies - Combo Cooling
- Case studies - Battery Cooling
- Case studies - Challenging Climates
- Case studies - Tetra Network Cooling
- Energy Savings with Free Cooling
- Calculate now: How much can you save?
- Energy Savings Counselling
AC-M11
tent cooling
-
AC-M11 -
AC-M11 with wheel kit -
AC-M11 with booster heater
AC-M11 air conditioner for tent cooling.
The AC-M11 air conditioner is a portable unit developed primarily to provide air conditioning in temporary or transportable buildings or tents.
The AC-M11 is a small, light-weight aluminium unit built into a rigid steel frame. The unit is designed for outside installation with ducted supply and return air. For field hospitals, where the need for filtration is higher than that of normal accommodation, a dual filtration system for the internal air path is available.
The function of the AC-M11 is based on a cooling circuit and two powerful fans. The evaporator section contains the evaporator and a radial fan which draws warm internal air through the cold evaporator and blows out the cooled air through the side or the top of the unit. The condenser section contains two condenser coils and a large axial fan returning the heat from the internal air to the outside.
Wheel kit
A wheel kit is available as a basic add-on-solution which can be fitted to the AC-M11 on site without using any tools. Easily accessible handles lift the unit to transport mode and the AC-M11 can be transported and moved to the optimal position by one person. On sites where no forklift is available, the wheel solution enables rapid and easy deployment of the AC-M11 aircon.
online
- Tents
- Accommodation
- Military camps
- Relief camps
- Work camps in oil and gas industry
- Designed for optimal utilization of a standard 20" ISO container (30 pcs).
- The AC-M11 is built into a strong metal frame with insulated panels where relevant, powder coated.
- All sheet metal parts are protected against corrosion by a minimum 80μm top coat.
- Top finish painting is standard sand colour.
- All sheet metal parts are protected against corrosion by a minimum 80μm top coat.
- Designed for air conditioning when the temperature is above 20oC.
- It can provide cooling at ambient temperatures up to +60oC.
- Option with built in heating will heat when ambient temperature is below 20oC.
- Scroll compressor for a high degree of reliability and low noise level.
- Automatic phase surveillance.
- Sequential start of units possible.
- Environment-friendly R134a refrigerant.
- HP/LP pressostat switches ensuring long compressor lifetime.
- Controlled by a room thermostat placed inside the tent (accessory).
- G3 filtration of internal air.
- Dual filters in front of internal air intake as an option.
- Fresh air intake.
- Four way fork lift handling.
- Easy strap down on air cargo pallets and stackable (two units on top of each other).
- Insulated flexible hoses Ø315 mm for exhaust and return air openings.
- Low voltage control circuit.
- CE-marked.
- ErP 2015 compliant.
| tent cooling | AC-m11 |
|---|---|
| NATO Stock Number with 8 kW heat | 4120-22-622-8737 |
| Operating range, ambient temperature, cooling | 20-60oC |
| Operating range, ambient temperature, heating | -32-(+20oC) |
| Airflow, internal, with hoses | 1700 m3/h |
| Airflow, external | 3500 m3/h |
| Nominal Cooling capacity Note Performance varies with varying conditions | 11,0 kW |
| Heating capacity (optional) | 8 kW |
| Power supply | 3x400 V / 50 Hz |
| Max. running current (cooling/heating) | 15 / 16 A |
| Locked rotor amperage Note Soft starter available | 65,5 A |
| Power consumption, cooling (tested) | 4200 W (worst case 5600) |
| Power consumption, heating (tested) | 8800 W |
| Refrigerant / quantity | R134a / 4,0 kg |
| Filter material, EN 779 | G3 + optional |
| Protection class | IPX5 |
| Hose connection | 1x315 Ø mm |
| Noise level measured inside tent, 1 meter from tent wall | 55 dB(A) |
| Weight (without accessories) | 170 kg |
-
AC-M11 -
AC-M11 -
AC-M11 -
AC-M11 with wheel kit -
AC-M11 -
AC-M11 booster heater -
AC-M11 booster heater -
AC-M11 booster heater open -
AC-M11 booster heater
 |
Remote thermostat with 15 m kabel |
 |
Insulated, flexible air duct Ø315 mm x 3 m incl. storage bag |
 |
Uninsulated flexible air duct Ø315 mm x 5 m incl. storage bag |
|
Air distribution air duct Ø315 mm x 6 m |
|
 |
F7 filter |
 |
Trolley with wheels, mounted on aircon |
Marienlystvej 65 - DK-7800 Skive. Tel.: +45 9614 3700
www.dantherm.com. email: info@dantherm.com
