ACT 7 mobile
air conditioner

  • ACT 7 standard setup ACT 7 standard setup
  • ACT 7 indoor unit ACT 7 indoor unit
  • ACT 7 outdoor unit ACT 7 outdoor unit

Mobile water-cooled air conditioner for fast and efficient temporary cooling

When in need of temporary small-scale cooling, an efficient and easily implemented solution is required. The ACT 7 mobile water-cooled air conditioner can deliver efficient cooling in a matter of minutes with no cooling knowledge or special training required to install the unit.

Ideal for rental companies and event organisations

Whether the requirement is to cool down a retail space, marquee, warehouse or even an office where the existing air-conditioning system has broken down, the ACT 7 will get the job done. With its robust and lightweight build, it is ideally suited to withstand the wear and tear characterising the rental market.

Whole-room cooling

In contrast to most air-cooled units, the ACT 7 will provide whole-room cooling without the need to continually exhaust internal air.

In addition, the unit does not require mounting of an exhaust air duct to an outside wall. Getting the ACT 7 up and running is simply a matter of connecting the cooling line con­nec­tors to the outdoor heat rejection unit.

How it works

The ACT 7 absorbs the heat into a refrigerant cooling system. From there, the heat is transferred to the self-containing chilled water/glycol system. It is then pumped through to the outdoor unit where the water is cooled and the heat dissipates.

The indoor unit is connected to the outdoor unit via two 22mm quick-connect, self-sealing flexible hoses. These hoses are supplied in 5m or 15m lengths and can be connected to a maximum length of 30m.

Contact Dantherm
online
Send us an e-mail
Order datasheets
Send us an e-mail
Applications
  • Rental companies
  • Event organizers
  • Facility Management
  • Server rooms
  • Data centres
  • Temporary buildings
  • Tents
  • Retail premises
  • Offices
  • Workshops
  • Fitness rooms
  • Industrial kitchens
  • Cold room cooling (temporary)
Features and Benefits
  • Whole-room cooling without the need to continually exhaust internal air
  • Smooth, low-sound operation with low energy consumption.
  • Resistant to wear and tear even when moved and reinstalled several times
  • No cooling knowledge or special training required to install the unit
  • Easy power connection with standard 230V CEE 7/7 power supply (EU only)
  • Easy-to-clean surfaces due to high-gloss painting
  • Stepless, variable fan speed for improved control and user comfort
  • Direct air towards desired spot using the adjustable grille
  • Easy to move both the indoor and outdoor unit. Easily fits through narrow doors and in elevators.
  • Quick-connect  cooling line connectors make installation easy and eliminate the need to recharge water lines.
  • Slim water and glycol hose connection eliminates need for large air ducts, meaning that only a small outdoor opening is required.
  • Indoor and outdoor units can be placed up to 30 metres apart and at different heights (up to 10 metres) for increased flexibility
  • Outdoor unit can stand on ground or hang outside building (chains included).

Control Panel

  • A - Cooling mode switch: 
    Select either ‘recirculation’ or ‘air-conditioning’ mode. In ‘air-conditioning’ mode, the electronic thermostat automatically controls the room temperature at the cooling set point from 8°C to 35°C.

  • B - LCD Display panel: 
    Shows the actual and set point temperature, operation modes and equipment status including any alarms. The cooling set point can be adjusted using the display.

  • C - Fan speed control dial: 
    Stepless adjustment of air flow for maximum comfort
Indoor unit - ACT 7 (EU) ACT 7 (UK)
Cooling capacity maximum1 kW 7.0 7.0
Power supply V/Hz 230/1ph/50 230/1ph/50  
Fuse A 16.0 13.0
Nominal running current A 11.2 11.0
Nominal power consumption kW 2.6 2.5
Power plug   CEE 7/7 UK mains
Airflow, internal (stepless variable) m³/h 930-1,310 930-1,310
Automatic cooling thermostat   Yes Yes
Defrost mode   Automatic hot gas injection Automatic hot gas injection
Sound level at 3m distance (min. speed) dBA 53 53
Sound level at 3m distance (max. speed) dBA 56 56
Operating range – inside temperature °C 8-35 8-35
Operating range – outside temperature °C 0-40 0-40
Product size (H x W x D) mm 1,070 x 852 x 420 1,070 x 852 x 420
Weight kg 117 117
Package size (H x W x D) mm 1,150 x 920 x 440 1,150 x 920 x 440
Weight including package kg 125 125
Refrigerant/charge gram R407C/880 R407C/880
GWP (Global Warming Potential)   1,774 1,774
CO2 equivalent ton 1,561 1,561
Max. length between indoor and outdoor unit m 30 30
Max. head m 10 10
Automatically pumps out condensed water   Yes, peristaltic pump Yes, peristaltic pump
Filter inside   Yes, cleanable Yes, cleanable
Quick-connection couplings water ½”   Yes, open face2 Yes, open face2
Water/glycol circuit   Prefilled 33% monoethylene glycol mix Prefilled 33% monoethylene glycol mix
Thermoplastic rubber elastomer castors   4 turnable Ø75mm, two with brake 4 turnable Ø75mm, two with brake
Maneuvering   2 strong handles 2 strong handles
Design   Hot-galvanized steel plates Hot-galvanized steel plates
Surface powder coating   RAL7047 Gloss 85 smooth RAL7047 Gloss 85 smooth
       
Outdoor unit      
Airflow, variable   Yes No
Sound level at 3m distance (min. speed) dBA 33 52
Sound level at 3m distance (max. speed) dBA 55 52
Wall placement   Yes, 2 chains with hooks included (L 650mm) Yes, 2 chains with hooks included (L 650mm)
Ground placement   Yes, 4 built-in rubber feet Yes, 4 built-in rubber feet
Product size (H x W x D) mm 520 x 560 x 310 520 x 560 x 310
Weight kg 18.5 18.0
Package size (H x W x D) mm 533 x 574 x 329 533 x 574 x 329
Weight including packaging kg 19.5 19.0
Bleeder screw   Yes Yes

 

  • ACT 7 indoor unit with handles ACT 7 indoor unit with handles
  • Castor mounted, rugged metal construction Castor mounted, rugged metal construction
  • Outdoor heat reject unit with automatically adjusting variable speed EC fan Outdoor heat reject unit with automatically adjusting variable speed EC fan
  • ACT7 connections Quick and easy installation
  • Quick connect interconnecting hoses. Quick connect interconnecting hoses.
  • Control panel and adjustable air outlet grille Control panel and adjustable air outlet grille
  • 5 or 15 metre connection hoses (max total of 30 metres per unit)
  • T-split for connection of two outdoor units to one indoor unit for extended operational range ≥ 40°C
  • Duct spigot kit
  • Forklift guides
Service manual