tent heating

  • Dantherm tent heating VA-M15MKII
  • Dantherm mobile heating VA-M15MKII

VA-M15MKII mobile warm air heater for tent heating.

The VA-M15MKII Warm Air Heater is a transportable unit, developed primarily to provide heating in tents or temporary, transportable buildings. The unit is designed to be placed outside the tent, with supply and return air ducted to the tent.

The VA-M15MKII heater operates on the in-direct fired (clean air) principle thus insuring that no combustion products or fumes are introduced into the occupied spaces. The forced air system provides for the most rapid warm-up capability.

The VA-M15MKII heater is essentially self-contained, requiring only a source of external electric power and fuel. The unit will operate effectively on almost all diesel fuels. Appropriate fuels are supplied by the fuel hose assembly which may be connected to external jerry cans or drums.

Contact Dantherm
Send us an e-mail
Order datasheets
Send us an e-mail
  • Tents
  • Accommodation
  • Field hospitals
  • Military camps
  • Relief camps
  • Temporary buildings
Features and Benefits
  • Cabinet made of 0,9 mm galvanized, powder coated steel sheet
  • Top finish painting standard NATO green, RAL 6014
  • Circular openings (Ø225) for one supply and one return air hose
  • Operation with or without return air hoses fitted
  • Adjustable fresh air intake from 0 to 40% of the total air volume
  • Cold start at temperatures down to -40oC
  • All necessary safety devices built in for protection and complete shut down in case of malfunction
  • When storing or transporting the heater, the flue stack is fitted onto the unit
  • Fitted with handles so that it can be carried manually by two persons
  • Fuel supply from jerry can or oil drum, with a fuel supply lance for jerry can as standard
  • Connect to the mains power supply or a separate diesel generator through a 15 m power cable
  • Controlled by an optional remote thermostat which will be placed inside the tent
  • Possibility for optional operating the unit with a CO monitor
  • Allowing ventilation without heating
  • Built according to EN 13842 and CE-marked
  • ErP 2015 compliant
mobile heater va-m15mkii
NATO Stock Number 4520-22-613-3506
Operating range -40-(+25oC)
Heat output 17,9 kW
Efficiency >85% 
Air flow @ 150/0 Pa 750/1080 m3/h
Fresh air volume 0-300 m3/h
Fuel consumption, max. 1,7  l/h
Ampere consumption, max. 4,3 A
Power consumption, max.  1000 W 
 Power supply 1x230/50 V/Hz 
Air discharge temperature, max. 80°C
Flex duct connection 225 Ø mm
Noise level 60 dB(A)
Weight 93 kg
  • Dantherm tent heating VAM15MKII VA-M15MKII
  • Tent heating VA-M15MKII
  • Mobile heating from Dantherm VA-M15MKII
  • Mobile heating VA-M15MKII

Remote thermostat with cable  

CO monitor with cable  

Isoleret fleksible slange Ø225

Insulated, flexible air duct, Ø225x3000 mm with spigot 

Opbevaringspose til fleksible slanger

Storage bag for flexible duct Ø225 mm 


Air distribution ducts, Ø225x6000 mm


Fuel lance for jerrycan

  Fuel lance for oil drum
Service manuals