tent heating

  • Dantherm tent heating VA-M40MKII
  • Dantherm mobile heating VA-M40MKII

VA-M40MKII mobile warm air heater for tent heating.

The VA-M40MKII Warm Air Heater is a transportable unit, developed primarily to provide heating in tents or temporary, transportable buildings. The unit is designed to be placed outside the tent, with supply and return air ducted to the tent.

The VA-M40MKII heater operates on the in-direct fired (clean air) principle thus insuring that no combustion products or fumes are introduced into the occupied spaces. The forced air system provides for the most rapid warm-up capability.

The VA-M40MKII heater is essentially self-contained, requiring only a source of external electric power and fuel. The unit will operate effectively on almost all diesel fuels. Appropriate fuels are supplied by the fuel hose assembly which may be connected to external jerry cans or drums.

Contact Dantherm
Send us an e-mail
Order datasheets
Send us an e-mail
  • Tents
  • Accommodation
  • Field hospitals
  • Military camps
  • Relief camps
  • Temporary buildings
Features and Benefits
  • Cabinet made of 0,9 mm galvanized, powder coated steel sheet
  • Top finish painting standard NATO green, RAL 6014
  • Circular openings (Ø225) for two supply and two return air hoses
  • Operation with or without return air hoses fitted
  • Adjustable fresh air intake from 0 to 40% of the total air volume
  • Cold start at temperatures down to -40oC
  • All necessary safety devices built in for protection and complete shut down in case of malfunction
  • When storing or transporting the heater, the wheels and flue stack are fitted onto the unit
  • A hook in the flange makes it possible to lift the heater with a crane
  • Fork-lift slots in the sides of the heater allow it to be lifted by a fork-lift
  • Fitted with handles so that it can be carried manually by four persons
  • Sturdy wheels that can be fitted by one man - no tools are required
  • Skids underneath the unit allow it to be transported across snow and ice when no wheels are fitted
  • Fuel supply from jerry can or oil drum, with a fuel supply lance for drum as standard
  • Connect to the mains power supply or a separate diesel generator through a 15 m power cable
  • Controlled by an optional remote thermostat which will be placed inside the tent
  • Possibility for optional operating the unit with a CO monitor
  • Allowing ventilation without heating
  • Built according to EN 13842 and CE-marked
  • ErP 2015 compliant
mobile heater va-m40mkii
NATO Stock Number 4520-22-612-3632
Operating range -40-(+30oC)
Heat output 38 kW
Efficiency >85%
Air flow @ 150/0 Pa 1825/2200 m3/h
Fresh air volume 0-500 m3/h
Fuel consumption, max. 3,6 l/h
Ampere consumption, max. 4,6 A
Power consumption, max. 1055 W
Power supply 1x230/50 V/Hz
Air discharge temperature, max. 80oC
Hose connection 225 Ø mm
Noise level 60 dB(A)
Weight 129
  • Mobile heating for NATO Flue stack
  • Dantherm military mobile heating Flexible air duct
  • Dantherm tent heating for military VA-M40MKII - circular openings for supply and return air ducts
  • Dantherm tent heating When storing or transporting the heater, the wheels and flue stack are fitted onto the unit
  • Mobile military heating VA-M40MKII Sturdy wheels that can be fitted by one man - no tools are required

Remote thermostat with cable  

CO monitor with cable  

Isoleret fleksible slange Ø225

Insulated, flexible air duct, Ø225x3000 mm with spigot 


Opbevaringspose til fleksible slanger

Storage bag for flexible duct Ø225 mm 



Air distribution duct Ø225x6000 mm


Fuel lance for oil drum

Fuel lance for jerrycan

Service manual