CDT mobile dehumidifiers

  • Mobile dehumidification CDT 40
  • Mobile dehumidifier CDT 40 S

Cost-effective, energy-efficient and user-friendly dehumidifiers for water damage restoration and drying of buildings.

Dantherm mobile CDT dehumidifiers offer quick and easy control for both damage service companies and the building industry. The CDT dehumidifiers are renowned for their user-friendliness, superior digital control and light yet robust design.

The CDT range offers capacities from 30 to 94 l/24 h and a maximum working temperature of 32°C, as well as superior control of settings and operations.

The digital finger touch display puts you in quick and easy control of humidity and service status. Furthermore, hours and energy consumption can be read off the display.

CDT panel_newsAdjustable and fixed handles ensure safe and convenient handling and operation. Big rubber wheels make the CDT's easy to move both up and down stairs and across seemingly impassable areas.

Special versions with ducts

CDT 30 S and CDT 40 S are fitted with a 1 kW heating element and a high pressure fan allowing connection of flexible air ducts. This is particularly suitable for drying out wet wooden floors.

Go to the tabs below for download of datasheets, brochures and the useful "Selection Guide for mobile dehumidifiers".

Vi ser fram
emot att svara
på dina frågor!

Telefon +46 (0)11 19 30 40

Kontakt formulär
Selection Guide
for mobile
dehumidifiers
Dantherm Selection Guide Download pdf
ERA

Dantherm is a member of
ERA - The European Rental Association
www.erarental.org

Användingsområde
  • Skadessanering
  • Byggnads torkning
  • Vattenverk
  • Uthyrningsföretag
  • Torrförvaring
Funktion och fördelar

 
 DEHUMIDIFIER

  • High capacity
  • Low energy consumption
  • Strong and robust cabinet of powder-coated hot galvanized steel
  • Epoxy-coated evaporator and condenser
  • Adjustable handle
  • Plastic bumpers
  • Low weight
  • Stackable (not CDT 90)
  • Large wheels
  • Special for CDT 30S and CDT 40S:
    Two Ø100 mm flex. air ducts may be connected on the back of the unit (max. length 5 m)
    Built-in 1 kW heating element
    Supplied with high pressure fan

WATER CONTAINER

  • Water container with handles
  • Automatic stop when water container is full or removed
  • Permanent drainage can be established with optional ½" hose connection
  • Condensate pump as optional extra (in a cassette)
  • Special for CDT 90:
     The CDT 90 has no water container. It is fitted with a drain outlet for connection to a ½" water hose

ELECTRONIC CONTROL

  • Digital touchpad control panel with display
  • Accurate hour and kWh counter (reading)
  • RH and °C monitoring (reading)
  • RH setting
  • Easy fault-finding
  • Service monitoring function
mobile dehumidifierCDT 30CDT 30SCDT 40CDT 40SCDT 60CDT 90
Operating range - temperature (oC) 3-32      
Operating range - humidity (% RH) 40-100      
Air volume (m3/h) 250 350 Note Measured without hoses mounted   350 560 Note Measured without hoses mounted   725   1000
Power supply 1 x 230 /50 V/Hz      
Max. ampere consumption (A) 2,7   2,6 3,6 3,7  4,9 7,2 
Max. power consumption (kW) 0,59    1,56 Note With heating element  0,82   1,83 Note with heating element 1,12  1,64 
Refrigerant R134a  R407c    
Sound level @ 1 metre (dB(A)) 56  60 Note Measured with hoses mounted   59  62 Note Measured with hoses mounted 62  62 
Weight (kg) 32  34  43   46  47 62 
Water container capacity (litres)  14  14 14  none 
Protection class  IPX4     
Specific energy consumption (kWh/litre) @ 30oC/80% RH  0,45 0,39 0,50  0,47 0,43 0,42
Specific energy consumption (kWh/litre) @ 20oC/60% RH  0,81 0,76 0,66 0,83 0,67 0,71

 

  • Dantherm mobile dehumidifier CDT 30S for connection of flex. air ducts
  • Dantherm dehumidifiers Large wheels
  • Digital touchpad control panel Digital finger touch display
  • Transportable dehumidifier with water container Water container
  • CDT mobile dehumidifier Adjustable handle
  • CDT mobile dehumidifier Plastic bumpers
  • Room hygrostat with 0,4 m cable, jack plug and fitting
  • Room hygrostat with 3 m cable and jack plug
  • 1/2" draining tap and screwed hose connector
  • Condensate pump
  • Wall bracket
  • Flexible air duct Ø 100 mm with clamp
Service manual

HX diagram

Selection guide