tent cooling

  • Dantherm tent cooling AC-M11

Air conditioner for tent cooling.

The AC-M11 air conditioner is a portable unit developed primarily to provide air conditioning in temporary or transportable buildings or tents.

The AC-M11 is a small, light-weight aluminium unit built into a rigid steel frame. The unit is designed for outside installation with ducted supply and return air. For field hospitals, where the need for filtration is higher than that of normal accommodation, a dual filtration system for the internal air path is available.

The function of the AC-M11 is based on a cooling circuit and two powerful fans. The evaporator section contains the evaporator and a radial fan which draws warm internal air through the cold evaporator and blows out the cooled air through the side or the top of the unit. The condenser section contains two condenser coils and a large axial fan returning the heat from the internal air to the outside.

Order datasheets
Send us an e-mail
Dantherm at DSEI
Sign up now
  • Accommodation
  • Tents
  • Relief camps
  • Military camps
Features and Benefits
  • Designed for optimal utilization of a standard 20" ISO container (30 pcs).
  • The AC-M11 is built into a strong metal frame with insulated panels where relevant, powder coated.
  • All sheet metal parts are protected against corrosion by a minimum 80μm top coat.
  • To finish painting is standard sand colour.
  • Designed for air conditioning when the temperature is above 20oC.
  • It can provide cooling at ambient temperatures up to +60oC.
  • Built in heating will heat when ambient temperature is below 20oC.
  • Scroll compressor for a high degree of reliability and low noise level.
  • Automatic phase surveillance.
  • Sequential start of units possible
  • Environment-friendly R134a refrigerant.
  • HP/LP pressostat switches ensuring long compressor lifetime.
  • Controlled by a room thermostat placed inside the tent (accessory).
  • G3 filtration of internal air.
  • Dual filters in front of internal air intake as an option.
  • Fresh air intake.
  • Four way fork lift handling.
  • Easy strap down on air cargo pallets and stackable (two units on top of each other).
  • Insulated flexible hoses Ø315 mm for exhaust and return air openings.
  • Low voltage control circuit.
  • CE-marked.
  • ErP compliant
tent coolingAC-m11
NATO Stock Number with 8 kW heat and softstarter 4120-22-622-8737
Operating range, ambient temperature, cooling 20-60oC
Operating range, ambient temperature, heating -32-(+20oC)
Airflow, internal, with hoses 1700 m3/h
Airflow, external 3500 m3/h
Nominal Cooling capacity Note Performance varies with varying conditions 11,5 kW 
Heating capacity (optional) 8 kW
Power supply 3x400 V / 50 Hz
Max. running current (cooling/heating) 15 / 16 A
Locked rotor amperage (LRA) 65,5 A
Power consumption, cooling (tested) 4200 W (worst case 5600)
Power consumption, heating (tested) 8800 W
Refrigerant / quantity R134a / 4,0 kg
Filter material, EN 779 G3 + optional
Protection class IPX5
Hose connection 1x315 Ø mm
Noise level, measured inside tent, 1 meter from tent wall 55 dB(A)
Weight (without accessories) 170 kg
  • Dantherm ACM 11 cooling ACM 11
  • Dantherm coolers for tents ACM 11
  • Tent cooling for military ACM 11
  • Mobile tent cooling ACM 11
  • Mobile cooling from Dantherm ACM 11
  • Remote thermostat with 15m cable and auto cooling/heating selection
  • Insulated, flexible air duct Ø315 mm x 3 m incl. storage bag
  • Uninsulated flexible air duct Ø315 mm x 5 m incl. storage bag
  • Air distribution air duct Ø315 mm x 6 m
  • F7 filter
Service manual