- Swimming Pool Ventilation
- Refurbishing Air Handling Units
- Commercial Ventilation
- Saving Energy in Leisure Centres
- Home Ventilation
- Dehumidification and ventilation in swimming pools
- Case stories
Ventilation with heat
recovery for suspended
The HCC 2 home ventilation can be fully customized to match any apartment or house
Fully customizable ventilation unit with heat recovery:
The HCC 2 is a unique and flexible home ventilation solution. With only 27,9 cm installation headroom it is ideal for installation in suspended ceilings or onto a wall, even hidden inside a closet. The unit can be electronically reversed, meaning that both air flows will be reversed. This allows the same unit type to be mounted with the inside/outside ducts connected to either the right or the left hand side of the unit. Electrical connections can be connected from either the left or the right.
Dantherm has developed an advanced PC-tool application for MS Windows computers. After installation of the unit, air ducts and condensate hose, the unit needs to be calibrated to the specific environment. Measurement of air volumes is done via built in air pressure ports, and appropriate initial adjustments are performed through the Dantherm PC-tool, connected to the HCC via a USB connection.
Wireless remote control:
Dantherm offers an LCD based wireless remote control, designed either to be mounted on the wall, or to be placed standing on a table or cabinet. This remote control is designed for the user, but also includes a special installer menu, where it is possible for the installer to do extensive settings without the use of the PC-tool.
The HCC 2 home ventilation unit can be fitted with RH and/or VOC demand-controlled automation that need not be touched once the system has been installed. The VOC sensor continuously monitors the level of artificial or natural organic chemicals of the extract air and adjusts the air flow level accordingly. Automatic demand control is based on a range of average consideration that guarantees a comfortable indoor climate in all conditions. By-pass damper and CO2 sensor are available as well.
Integration in Building Management Systems (BMS):
The HCC 2 home ventilation unit offers a data connection point over TCP/IP interface carrying ModBus protocol data. Upon request, Dantherm issues a protocol data sheet allowing a qualified BMS programmer to interface the HCC unit to any building management system, as well as KNX intelligent building system.
Are you interested in getting in contact with Dantherm Ltd.?
Contact details: click here
The HC range of home ventilation units are certified for use in passive houses by the German Passive House Institute.
- Easy access
- Easy filter change
- Ultra-thin home ventilation unit
- Calibration of air volumes is done with Dantherm PC-tool
- Accessory Control: Control of heating coils, geothermal collector, duct dampers, sensors, filter alarms etc.
- RH demand sensor
- Wireless remote control
- High efficiency heat recovery – up to 94%.
- EC fan motors with low energy consumption (SFP data).
- Only 300 mm installation headroom height is required.
- Time controlled ventilation level, based on 11 different built in pre-programmed week programs. This reduces power consumption in periods with low ventilation demands.
- Summer cooling mode, in which the supply fan is stopped, and any open window will supply colder outside air, decreasing the room temperature. This requires a wired control HCP 10*.
- Fireplace mode, creating a momentary inside overpressure, to enhance chimney functionality.
- Easy-to-install and commissioning solution with built in air measure ports, for easy balancing with PC-Tool*.
- Electronically left / right fan direction switching, allowing same unit type to adapt any physical installation requirements, regardless of ceiling and wall selection.
- Demand controlled ventilation*.
- Highly customizable unit, by adding a high variety of internal as well as external accessories. See more details under the tab “Accessories”.
- TCP ModBus connection, for inter-operation with Building Management System.
|Mechanical ventilation with heat recovery||hcC 2|
|Air volume at 100 Pa||260 (m3/h)|
|Heat exchanger||counter-flow, plastic|
|Installation surrounding temperatures||+12 to +40oC|
|Outdoor temperature (w/o preheating installed)||-12 to +50oC|
|Outdoor temperature (with preheating installed)||-25 to +50oC|
|Power supply||1x230 V, 50 Hz|
|Current consumption max. (without/with preheater)||127/950 Watt|
|Duct connectors||125 Ømm|
Wired control HCP 10
Dantherm offers a prewired control unit, which is connected to the ventilation unit with a 6 m cable. The wired control comes with a white plastic frame and a metal frame for fastening into a standard junction box. Alternatively Dantherm can supply a box for fixing to the wall in an appropriate place.
The HCP 10 wired control gives the user the folowing possibilities:
Manual control of air change (step 0-4)
Wireless remote control, HRC 2:
The remote control gives access to:
External electrical preheating coil, 900 W
The electrical heating coil prevents ice building up in the heat exchanger at low temperatures. The heating coil is mounted in the outdoor air duct. The heating coil is connected to and controlled by the HCC 2 controller, which adjusts the heat output so as to ensure an ice-free heat exchanger with the lowest possible energy consumption.
Pre-heat insulation kit
This insulation kit is designed for fixing to the HCC 2 preheater. This customized insulation kit protects against thermal bridges, condensation and excessive energy consumption.
Mechanic bypass module
The HCC 2 home ventilation unit can be fitted with an automatically controlled bypass damper module, that exploits the colder outdoor air to cool down the home, e.g. after a hot summer’s day, when the outdoor night time temperature falls below the temperature of the house. The bypass module leads all the hot exhaust air past the heat exchanger in order to achieve the best possible cooling effect.
RH% demand sensor
The HCC 2 home ventilation unit can be fitted with a humidity sensor (RH%).
VOC air quality demand sensor
The HCC 2 unit can be fitted with a VOC air quality sensor. This sensor will continuously monitor the level of artificial as well as natural organic fumes in the air. Examples of included fumes:
Using the VOC sensor in demand mode will result in the correct level of ventilation with lowest possible electrical power consumption. If a wireless remote control is connected, the actual VOC level will be shown in the display using a 3 level icon.
Digital plug (bag with 25 pcs.)
This digital plug is connected to the control of the HCC 2 unit. This allows to override the following :
Condensate pump kit
This condensate pump kit is designed for mounting on HCC 2 units where there is no safe drain with fall to a drainage or on units where the drain is too far away (more than 5 m horizontal way). The kit is furnished with a bracket for fixing it to the HCC 2 unit, a power supply cable for connection to the HCC 2 unit, pressure equalization hose and drain hose.
Hygrostat, Sauter HSC 120 F001
The hygrostat is connected to the accessory control in case that a higher air change rate is required in rooms with high humidity.
Accessory control HAC 2:
One or more of the following functions can be connected to the accessory control:
Power supply 230VAC – 24VDC, for duct control:
Power supply to be mounted in the accessory control if the ventilation unit controls a duct damper.
The CO2 sensor is connected to the accessory control if the air change has to be controlled in accordance with the CO2 level in a given room.
USB cable, 3 m:
USB cable to be used in connection with software update of HCC 2 and Dantherm PC Tool (HPT 1).
Calibration set (bag with 10 sets):
This calibration kit contains 10 sets with each 3 m hose, two suction cups with hook and two nipples. The kit is used for adjusting the HCC 2 air flows.
Dantherm PC Tool Kit (HPT 1):
The PC Tool Kit contains a USB plug with program and quick guide + USB cable.
It also has a user menu, where the user can read and adjust various settings, such as week programs, set points, alarms and historical data about temperatures and air quality (accessory).
Passive House Certificate